What Does a 1:400 Dilution Mean?
A 1:400 cleaning dilution usually means 1 part concentrate plus 400 parts water. See exact amounts for common bottles, a gallon, and cleaning buckets.
Part of the main guide
This article belongs to the Cleaning Dilution Guide. For another ratio or container size, use the Cleaning Dilution Calculator.
Quick answer
A 1:400 dilution usually means 1 part concentrate + 400 parts water, so the finished mix has 401 total parts.
- 500 mL final: about 1.25 mL concentrate + 498.75 mL water.
- 1 L final: about 2.49 mL concentrate + 997.51 mL water.
- 32 oz final: about 0.080 fl oz / 2.36 mL concentrate.
- 1 gallon final: about 0.32 fl oz / 9.44 mL concentrate.
Check the label wording first. Some manufacturers use a ratio to describe concentrate-to-total-solution instead of concentrate-to-water. If the label gives mL per liter or oz per gallon, use that direct dose.
What 1:400 means on a cleaning label
Under the common label-style convention used across CleaningRatio, the first number is concentrate and the second is water. A 1:400 mix therefore uses one equal measure of product for every 400 equal measures of water.
This is a very dilute mixture. Small measuring errors matter more than they do at 1:10 or 1:20, especially in a spray bottle. Do not free-pour a concentrate when the intended dose is only a few milliliters.
If the product says “1 in 400,” “1:400 final,” or gives a fixed dose, follow the manufacturer's own wording rather than forcing it into this convention.
The simple 1:400 formula
- Concentrate = Final Volume ÷ 401
- Water = Final Volume − Concentrate
For 1 liter, divide 1000 mL by 401. That gives about 2.49 mL concentrate; the rest is water.
For the general parts-versus-final-volume logic, use How to Calculate Dilution Ratio.
1:400 dilution chart
| Final volume | Concentrate | Water |
|---|---|---|
| 500 mL | ≈ 1.25 mL | ≈ 498.75 mL |
| 750 mL | ≈ 1.87 mL | ≈ 748.13 mL |
| 1 L | ≈ 2.49 mL | ≈ 997.51 mL |
| 16 fl oz | ≈ 0.040 fl oz / 1.18 mL | ≈ 15.96 fl oz |
| 24 fl oz | ≈ 0.060 fl oz / 1.77 mL | ≈ 23.94 fl oz |
| 32 fl oz | ≈ 0.080 fl oz / 2.36 mL | ≈ 31.92 fl oz |
| 1 gallon / 128 oz | ≈ 0.32 fl oz / 9.44 mL | ≈ 127.68 fl oz |
For these small concentrate amounts, milliliters are easier to measure than tiny fractions of a fluid ounce.
Use a precise measure for small bottles
A 16- or 32-ounce bottle at 1:400 needs only about 1.18 to 2.36 mL of concentrate. A capful or splash can be several times the intended amount.
Use a dedicated marked syringe, medicine-style cup, or graduated cleaning measure. Never use the same tool later for food or medicine.
A weak final dilution does not mean the undiluted concentrate is harmless. Follow its protective-equipment and handling instructions while measuring.
1:400 bucket examples
| Final bucket size | Concentrate | Water |
|---|---|---|
| 3 L | ≈ 7.48 mL | ≈ 2.993 L |
| 5 L | ≈ 12.47 mL | ≈ 4.988 L |
| 10 L | ≈ 24.94 mL | ≈ 9.975 L |
Do not strengthen the mix because the amount looks small. The point of a 1:400 label is that the concentrate is designed to be used at a low dose for that stated task.
How strong is a 1:400 mix?
Under the 1 part concentrate + 400 parts water convention, concentrate makes up about 0.249% of the finished mixture. That number describes how much of the concentrate is present; it does not tell you the percentage of any active ingredient inside the concentrate.
For comparison, 1:200 is about 0.5% concentrate by finished volume. A 1:400 mix is therefore about half as concentrated as 1:200.
See What Does a 1:200 Dilution Mean? and What Does a 1:500 Dilution Mean?.
How to mix 1:400 reliably
- Confirm the label convention. Make sure the ratio really means concentrate to water.
- Choose the final volume. Do not calculate from a vague “half bottle.”
- Measure concentrate in milliliters. This matters at high dilution ratios.
- Add water as directed. Follow the label's order of mixing when specified.
- Label the secondary container. Include product name and dilution.
For odd sizes, use the Cleaning Dilution Calculator.
Common 1:400 mistakes
- Dividing by 400 instead of 401. Under this convention the finished mix has 401 total parts.
- Free-pouring the concentrate. Tiny doses need a marked measure.
- Ignoring a clearer manufacturer dose. mL/L or oz/gal directions beat a generic ratio assumption.
- Making the mix stronger for heavy soil without label support. That changes the intended dilution.
- Using the same dilution for every task. One product can specify different ratios for different jobs.
For confusing labels, use How to Read Cleaning Dilution Instructions on Labels.